Camera set in 3D view can be store.
Once you have set up your camera you will want to save the position, so you can go back to it later.
Click on the Camera menu, then click on Save Camera
This will pop up a small window
Type in the name for your view and click OK.
You can save as many different views as you like.
If, while setting up your camera views, you make a mistake, there are a few buttons that can help.
Camera Undo will allow you to go back to your previous view setting.
And if everything goes completely wrong and you want to start again, click on Full View. This will reset the camera to viewing the whole scene.
Full View: Will set the current view only
All Full View : Will set all open views to Full View
There are two ways of saving 3D camera
-From the menu Camera, select Save Camera...
-From the right-click menu, select Camera and then select Save Camera...
Type in a name from the Camera and press OK
To delete a Camera
-From the menu Camera, select Delete Camera...
-From the right-click menu, select Camera and then select Delete Camera...
Select the camera and press OK